RatRig VCore 4 - Machined XY Joiners Annex

RatRig VCore 4 - Machined XY Joiners AnnexVCore4. 1 Update: The joiners work just fine with VCore 4. 1, including the 18mm steel bar. There is a spacer that can be printed, or you can use the steel spacers that ratrig includes with the upgrade kit. The only issue if you are using the Ratrig 4. 1 carriage. They raised the endstops 2mm, so we now have taller 12mm middle plates for our joiners. We have the 12mm middle plates available for purchase separately, but all of the XY Joiner kits going

2 Rail Lock Spacers

These are custom cut abs panels for the Tiny-T printer

35mm thick 5083 Aluminum Cast Tooling plate and is 160mm^2

PLEASE NOTE:

We also have added two additional threaded 5mm holes closer to the center of the build plate

Attribute Accepted Value(s) [Our Recommended Value] Extruder Temperature 190-220 Degrees Celsius [210] Heated Bed 50-65 Degrees Celsius [60] Build Surface Textured PEI or other surface with with separation layer Cooling Fan 0-70% range varies by cooling capabilities Environmental Temperatures 40-80C [35C]

Revo Voron is fully compatible with the Revo ecosystem

Because of their strength these skis were modified to be axe handles

McNair for giving us the opportunity to work with you and Michigan State University

Acrylic Panels for the 160mm Bed Sized Micron printer - 3mm thickness

so we now have taller 12mm middle plates for our joiners

There are a few parts for this that you need to print yourself as we can't stock and print all the colors and types of filament that end users may want